Products and Services

The ARIS
Flaw Detection System

The ARIS system provides high speed, high-resolution detection of metal materials properties as detailed in our applications and technology sections.  The complete ARIS system consists of one computer based analyzer and one interchangeable RM-EMAT transducer.  The system’s computer hardware and display are housed in a rugged aluminum chassis and all transducers are machined from aluminum for maximum durability in industrial environments.  Windows based system software provides a user-friendly interface and enables full featured operation without requiring prior scientific expertise.  ARIS system purchases include a one-year warranty on all service and calibration. See below or download the ARIS System Specification Sheet for additional details.

General System Specifications:

Display:                                   VGA compatible LCD, external VGA drive available
User Interface:                       Industrial 88 Key keyboard with touchpad
Processor:                             600 MHz, 128 MB RAM (up to 8 hours data logging), multi-processor capability for multiple channels
Software:                                Proprietary ARIS software, Windows operating system
Outputs:                                  Isolated Relays (2) 0-250 VAC, 0-100VDC, 7 amps max, RS-232, 4 to 20 mA optional
Operating Temperature:      0-70˚ C, 0-100% humidity
Power Requirements:         115/230 VAC ±10%    50/60 Hz  5.25 amps (max.)
Dimensions:                         17” (W) x 8.675” (H) x 19.0” (D)
Weight:                                   47 lbs. (approx.)                        

Analyzer Specifications:

Type:                                                  Proprietary narrowband spectrum analyzer
Signal Output Characteristics:     Frequency Range: 100 kHz-14MHz
Frequency Resolution:                  2Hz Min.
Output Voltage:                               0-50 VAC peak
Current:                                            0-250 mA short circuit protected
Sweep Speed: .                              9 ms (min.) including latency period
Signal Input Characteristics:        Input Sensitivity: 100 μV (min.) differential
                                                           Programmable gain from 0.5 to 128

RM-EMAT Transducer Specifications

RM-EMATS:                  1-2 per standard system
Temperature:               80˚ C maximum
Configurations:            Encircling or tangential
Mounting:                       Fixed or floating on proprietary transducer carriages
Weight:                           2-7 lbs.

Download the ARIS Operation Manual here

Resonance Mode EMAT (RM-EMAT) Transducers

These machined aluminum and anodized transducers can be interchanged in the ARIS system to accommodate materials of different sizes and applications.  Modular in construction, the units can be 'stacked' to simultaneously perform multiple tests on the same sample. With no moving parts, the units can survive in most hostile environments and have a long, trouble free life cycle.  Discounted transducers are available at the time of an ARIS system purchase and all transducers are covered under the Resonic NDT’s standard one-year warranty. 

Where to buy

For inquiries click here.